
WARTHOG® WT CLASSIC
€0,00
Article number 2-WT-3/8-C03
Description
The WARTHOG® WT CLASSIC can negotiate elbows and clean-outs commonly found in laterals at homes, buildings, restaurants and other light commercial facilities. This tool is most commonly used on small capacity pumps and jetters. An excellent choice to remove grease and semi-hard coatings. Also good for cutting roots, clearing ice and removing blockages.
Pipes made of cast iron and those that have sand or silt can act as abrasive agents that can aggressively wear out the tool. Therefore WT is supplied with permanent carbide buttons to increase the head life. The carbide buttons are available in all offsets and add up to 5 times the life compared to previous WT models. The jets are replaceable, threaded 1/8″ NPT.
Technical data
Connection
3/8″
For recyclers
No
Front jets
1 x 1/8″ npt
Length x diameter
76 x 48 mm
Max working pressure
100 - 350 bar (1500 – 5000 psi)
Min water flow at 1450 psi
20 – 45 l/min (5 – 12 us gpm)
Pipe dimension
75 – 150 mm (3″ – 6″)
Rear jets
2 x 1/8″ npt
Rotation speed
300-500 rpm
Weight
0,54 kg
Connection
1/2″
For recyclers
No
Front jets
1 x 1/8″ npt
Length x diameter
86 x 48 mm
Max working pressure
100 - 280 bar (1500 –4000 psi)
Min water flow at 1450 psi
20 –79 l/min (5 – 21 us gpm)
Pipe dimension
75 – 150 mm (3″ – 6″)
Rear jets
2 x 1/8″ npt
Rotation speed
300-500 rpm
Weight
0,54 kg