Products

BL SWIPER® BLACK is the smallest nozzle in the BL SWIPER® family and is recommended for pipe sizes from 100 mm up to 250 mm (4”-10”), depending on available water flow rate. The BL SWIPER® BLACK is designed to work with clean water. The BL SWIPER® cleaning nozzles are developed for maximum cleaning power of sewers and storm water pipes with a construction made to optimize the cleaning effect by using the waterflow from the high-pressure pump together with the jet streams, created through the nozzle design. The water flow, through the pressure in the jets, creates a jet stream and the jet streams create increased moving power through several channels in the nozzle. The total force generated by the nozzle, air and water force, depending on if nozzle work under water or in dry pipe, is used to clean the pipe in a resource saving manner. Benefits of BL SWIPER®: • The water/air channels create immoderate force at lower energy level resulting in lower fuel consumption. • Operate effective already at 30 Bars (450 PSI) pressure at the nozzle. • Can easily be adapted for effective cleaning in water filled pipes. • Low total water and energy consumption. • By operating the BL SWIPER® according to the instructions you save money, wear and tear of the jetting unit and in total lessen the environmental impact.

BL SWIPER® GREEN is recommended for pipe sizes from 150 mm up to 600 mm (6”-24”), depending on the available pump capacity. The BL SWIPER® GREEN is designed to work with clean water. The unique design of the BL SWIPER® series of pipe cleaning nozzles create the highest power at the lowest energy demand. This will decrease cleaning time, total water consumption and tear and wear on your jetting unit. The effectiveness of a cleaning nozzle can be measured through the travelling time it needs from downstream manhole to upstream manhole. With the same travelling speed, the water jets, when retracting the nozzle, will move material faster and more effective to the downstream manhole. The inner design of the BL SWIPER® ensure long and well gather jets with incomparable cleaning and material moving power. BL SWIPER® series of nozzles are extremely powerful. Always use extender pipe when possible, preventing nozzle from turning in pipe. When BL SWIPER® nozzle is travelling up the pipe and getting close to the upstream manhole, slow down the feeding of the hose to prevent nozzle from jumping out of the manhole.

BL SWIPER® GREEN LARGE is recommended for pipe sizes from 300 mm up to 1200 mm (12”-48”), depending on available pump capacity. The BL SWIPER® GREEN LARGE is designed to work with clean water. To assure the proper choice of BL SWIPER® for your work and your jetting truck specifications, always consult AquaTeq® technical sales staff or AquaTeq® authorized distributor. We put pride in supplying the right product, properly adapted to your truck specifications and your needs. When contacting us always make sure to have information about your high-pressure pump maximal water flowrate and maximal pressure as well as hose size and hose length. If you are having problems with blowing toilets, we will happy to assist with technical and operating instructions how to work with the BL SWIPER® series of nozzles to avoid this situation.

BL SWIPER® ORANGE is recommended for pipe sizes from 125 mm up to 400 mm (5”-16”), depending on the available pump capacity. The BL SWIPER® ORANGE is designed to work with clean water. The construction of the BL SWIPER® is made to optimize the cleaning effect by using both the water flow from the high-pressure pump, together with the jet streams created by the BL SWIPER® in pipe. The BL SWIPER® is developed to move material in pipe, sand, gravel, stones, and sludge. The low jet angle, together with the long jet stream, increase the speed of the water in pipe. This design moves material faster and more effective than most pipe cleaning nozzles. Why choose a BL SWIPER®? • You are looking for a high effective pipe cleaning nozzle that makes the most of your jetting truck investment. • You want to save total water consumption on each individual cleaning job. • You understand your jetting truck will never be more effective than the tool at the end of the hose. • You are looking for a nozzle lasting and performing for a long period of time • You need an effective nozzle that still can be operated in a manner avoiding blowing toilets.

BL SWIPER® RED is recommended for pipe sizes from 150 mm up to 600 mm (6”-24”), depending on the available pump capacity. The BL SWIPER® RED is designed to operate with recycling water or clean water. The design of BL SWIPER®RED is specially developed to stand the blasting effect from recycling water. The nozzle is always supplied with ceramic stainless-steel jets. Due to the water conductive design together with the air channels the nozzle clean pipe extremely effective already at 30 bars (450 PSI) pressure at nozzle. This means lower rpm on jetting truck, less fuel consumption as well as less wear on high pressure pump, valves, hoses etc. Operating according to our instructions our customers have been able to cut diesel consumption with as low as 60%. That is a great saving and prevent you from putting money down the drain. Considering a diesel consumption of +50 liter per hour (13 gph) for a high-volume recycling truck your investment in BL SWIPER® cleaning nozzle will shortly turn into saved money on your bank account.

BL SWIPER® RED LARGE is recommended for pipe sizes from 300 mm up to 1200 mm (12”-48”), depending on available pump capacity. The BL SWIPER® RED LARGE is designed to work with recycling water as well as clean water. Due to the extreme power of the BL SWIPER® series of nozzles, the exchangeable jets need to be adapted to working task. Depending on working task there are two different jet setups: The standard set up of BL Swiper® is used where the water level in pipe is low, meaning there is no water in pipe or just a low level (max 50 % water coverage of the nozzle). The standard set up is also used when it is a need to reduce risk of blowing toilets. Service lines from housing with sensitiveness to rapid air currents always need to be considered. By the proper operating technique this can easily be avoided with the BL SWIPER® series of nozzles, without affecting the cleaning power in main line. We are happy to assist with operating instructions. If you want optimal cleaning efficiency in pipe with low water level and clean the pipe as quick as possible with minimal total water and diesel consumption, use a maximum pressure, pulling back the nozzle , of 60 bar (900 PSI). Note that BL SWIPER® works effective already at 30 bar (450 PSI) pressure at nozzle. The high-water level set up is used where the water level in pipe is high. Contact us to learn more.

Suction and pressure hose for transport of abrasive material. Very flexible and easy to handle. Technical description: Temperature range: -30 – +70 °C Inner tube: Red smooth wear resistant NR rubber Reinforcement: Synthetic textile with embadded steel helix Cover: Wear and weather resistant NR/SBG (black corrugated).

The enz® Bulldog® rotating nozzle has been designed for operation with recycling water and fresh water. The cleverly built sliding bearing allows the use of every kind of recycled water. An integrated oil-free braking system results in a low wear and tear operation and in controlled numbers of rotation. In this way a most efficient and economic pipe cleaning is achieved. The bore of the nozzle insert determines the admissible size of the dirt particles up to a maximum Ø 1mm. Characteristics Easy to handle The tool is practically maintenance-free Applications To remove fat, roots and harder incrustations For operation with recycling water and fresh water

The enz® Bulldog® rotating nozzle has been designed for operation with recycling water and fresh water. The cleverly built sliding bearing allows the use of every kind of recycled water. An integrated oil-free braking system results in a low wear and tear operation and in controlled numbers of rotation. In this way a most efficient and economic pipe cleaning is achieved. The bore of the nozzle insert determines the admissible size of the dirt particles up to a maximum Ø 1mm. Characteristics Easy to handle The tool is practically maintenance-free Applications To remove fat, roots and harder incrustations For operation with recycling water and fresh water Download Bulldog® manual

The enz® Bulldog® rotating nozzle has been designed for operation with recycling water and fresh water. The cleverly built sliding bearing allows the use of every kind of recycled water. An integrated oil-free braking system results in a low wear and tear operation and in controlled numbers of rotation. In this way a most efficient and economic pipe cleaning is achieved. The bore of the nozzle insert determines the admissible size of the dirt particles up to a maximum Ø 1mm. Characteristics Easy to handle The tool is practically maintenance-free Applications To remove fat, roots and harder incrustations For operation with recycling water and fresh water Download Bulldog® manual

The enz® Bulldog® rotating nozzle has been designed for operation with recycling water and fresh water. The cleverly built sliding bearing allows the use of every kind of recycled water. An integrated oil-free braking system results in a low wear and tear operation and in controlled numbers of rotation. In this way a most efficient and economic pipe cleaning is achieved. The bore of the nozzle insert determines the admissible size of the dirt particles up to a maximum Ø 1mm. Characteristics Easy to handle The tool is practically maintenance-free Applications To remove fat, roots and harder incrustations For operation with recycling water and fresh water Download Bulldog® manual

The enz® Bulldog® rotating nozzle has been designed for operation with recycling water and fresh water. The cleverly built sliding bearing allows the use of every kind of recycled water. An integrated oil-free braking system results in a low wear and tear operation and in controlled numbers of rotation. In this way a most efficient and economic pipe cleaning is achieved. The bore of the nozzle insert determines the admissible size of the dirt particles up to a maximum Ø 1mm. Characteristics Easy to handle The tool is practically maintenance-free Applications To remove fat, roots and harder incrustations For operation with recycling water and fresh water Download Bulldog® manual

Cleaning sewer lines when near home installations brings the risk of pressure equalisation through toilets or stench traps. This comes from negative pressure arising ahead of the nozzle or excess pressure following the nozzle if the installation is not correct or venting is not working properly. It's a very unpleasant surprise when this effect unintentionally turns a toilet into a shower! For this reason, enz® collaborated with a prestigious technical institute to develop and test the Bulldog® Antiblast. The Bulldog® Antiblast prevents this unpleasant side effect and guarantees cleaning in all directions, right down to the pores. Advantages No pressure equalisation through stench traps or toilets Excellent streak-fee, all-around cleaning Low maintenance, and compatible with recycled water Proven design Very simple to match to pump capacity Scientifically examined and tested

The enz® Bulldog® rotating nozzle has been designed for operation with recycling water and fresh water. The cleverly built sliding bearing allows the use of every kind of recycled water. An integrated oil-free braking system results in a low wear and tear operation and in controlled numbers of rotation. In this way a most efficient and economic pipe cleaning is achieved. The bore of the nozzle insert determines the admissible size of the dirt particles up to a maximum Ø 1mm. Characteristics Easy to handle The tool is practically maintenance-free Applications To remove fat, roots and harder incrustations For operation with recycling water and fresh water

The C-RAY®200 is the smaller version of C-RAY®400 bottom cleaning nozzle. The C-RAY®200 is made in quality stainless steel with same water directing technology inside as its big brother. The water directing technology decrease pressure drop in nozzle. This means that you only loose less than 10% inside nozzle, which in comparison with many other designs saves you 20-30%. Each day nozzle is in use you will not only clean effectively, but being able to operate your jetter and combination truck at a lower rpm, resulting in less wear and tear of the unit, as well as saved fuel costs – every hour. The design assures effective and cost saving debris moving in pipe. The bottom part is made of hardox steel with round shape to position the nozzle properly in smaller pipes. C-RAY®200 operate effectively from 200 mm pipes up to 600 mm (8”-24”). It is supplied with 6 rear jets and in rear cases a front jet can be mounted. Same philosophy as for the C-RAY®400, meaning less is more. We will be happy to tell you more. Each C-RAY®200 is supplied with a quality harden stainless steel swivel, that capture the movement of the sewer cleaning hose and make sure the nozzle stay correct positioned in pipe.

Customer that was using our JAWS®nozzle asked us to develop a bottom cleaning nozzle with the same technology and quality as the JAWS®. The result was the C-RAY®400. The C-RAY®400 is made in quality stainless steel with the same water directing technology inside for the most effective debris moving power. A bottom cleaning nozzle is to prefer when pipe is somewhat larger, and the debris is mainly in the bottom of the pipe. C-RAY®400 operate effectively, depending on available water pump capacity, from 400 mm pipes up to 2500 mm (15”- 100”). It is supplied with 8 rear jets and, if necessary, a front jet. Many bottom cleaners have more rear jets than this but with our background as pipe cleaners and the investigations we have taken part in, we know that it is better to have fewer jets with more power than many with less. This is easy mathematics calculation the diameter of each jet. Comparing a 2 mm jet with a 4 mm jet, the 4 mm jet is four times as thick and four times as strong. Each C-RAY®400 is delivered with a quality harden stainless steel swivel, which purpose is to capture the movement of the hose and make sure the nozzle is correct positioned in pipe. To learn more contact us at AquaTeq® or our distributors.

enz® Camera – the camera nozzle with integrated data management The enz® Camera Nozzle adds a new dimension to the enz® nozzle product range! The modular design allows universal use with all nozzle types, such as the eBomb or the eBulldog, and thus guarantees streak-free all-around cleaning in every application!

The new camera pull nozzle from enz® is compatible with most cameras on the market. It convinces with a very high cleaning and pulling performance. Due to the loss-proof screw and cover, the nozzle is extremely user-friendly. Furthermore, the enz® camera nozzle is curved, wear-resistant and easy to handle. The application range is 80 - 250 mm (3" - 10").

Sewer jetting and heavy duty, high pressure water cleaning. Advantages: • Very low sliding resistance even when worn. • High flexibility, even at low temperatures. • Easy to handle and user friendly. • Deformation resistant. Retain shape after strain. • Extra high strength and security due to aramide reinforcement. • Long service life. Technical description: • Inner tube: SBR (black, smooth). • Reinforcement: aramide textile, braided. • Cover: SBR/NBR (black, smooth). • Temperature range: -30°C to +80°C. Complementary information: All assembled hoses are pressure tested at 375 bar and have a unique number. Delivered with test certificate on factory assembled hose.

Enz® Chain Scraper – Versatile and Efficient Pipe Cleaning Tool The Enz® Chain Scraper is a highly versatile tool designed for efficient pipe cleaning. It is easy to handle and requires minimal maintenance, making it a reliable solution for various applications. With a single tool, multiple pipe diameters can be cleaned effectively, removing mineral deposits, incrustations, and concrete residues with precision. Applications: Pre-renovation cleaning – Ideal for preparing pipes before relining, coating, or injection processes. Complete root removal – Effectively eliminates root intrusions for improved pipe function. Deposit and incrustation removal – Cleans tough buildups such as scale, grease, and rust. Concrete residue removal – Ensures newly installed sewage pipelines are free from obstructions before inspection. The Enz® Chain Scraper is an essential tool for professionals looking to maintain and restore sewer and drainage systems efficiently.

The Child safe roller guide has several protection features. In addition to prevent child or other person from falling into manhole, the Child safe roller guide also protects the operator if nozzle turn in pipe. It also prevent sewer water from spraying up from manhole when sewer nozzle approach. Note; The design do not allow standing or walking on the Child safe roller guide. Features: • Made of aluminum for low weight. • Easy to set up and breakdown. • Design allows operator to look down in manhole. • Rollers for jetting hose up to 1 ¼″. • Removable lid for suction hose up to 6″. • Fits manholes Ø540 – 650 mm (22″ – 25″).