enz®-Scrapers
Article number 2-50075G
The scraper is used where particularly high flushing capacity and a correspondingly good flushing effect are required. Depending on the design, the tool is suitable for channel diameters between 300 and 4500 mm. During this process, the scraper does not float. It thus ensures excellent basic cleaning even in channels that have a lot of water passing through them.
Area of application:
- Pipe diameter of 300 mm - 4500 mm
- Cleaning large quantities of deposits
- Cleaning the bottom of a channel
Article number |
Connection
|
Pipe Dimension
|
Min. L/min at 100 bar
|
Rear Jets
|
Front Jets
|
Length x Diameter
|
Weight
|
Recycling
|
Bursting Pressure
|
---|---|---|---|---|---|---|---|---|---|
2-50075G | 3/4" | 300 - 500 mm | 100 l/min (29 US GPM) | 4 x M10, 2 x FanJet M10 | 1 x M10 | 400 x 220 x 235 mm | 12 kg | Yes | 250 bar (3625 PSI) |
2-50100G | 1" | 400 - 1500 mm | 150 l/min (40 US GPM) | 6 x M10, 2 x FanJet M10 | 1 x M10 | 510 x 275 x 270 mm | 25,5 kg | Yes | 250 bar (3625 PSI) |
2-50125G | 1 1/4" | 500 - 2500 mm | 300 l/min (80 US GPM) | 6 x M10, 2 x FanJet M10 | 1 x M10 | 650 x 320 x 300 mm | 36 kg | Yes | 250 bar (3625 PSI) |
2-50150G | 1 1/2" | 500 - 4500 mm | 400 l/min (100 US GPM) | 8 x M10, 2 x FanJet M10 | 1 x M10 | 655 x 300 x 170 mm | 54 kg | Yes | 250 bar (3625 PSI) |