Recycling IMC
Article number 2-14100R
Description
The new impact milling cutter family called IMC can be used with recycling water. Due to a very high impact and the diamond or carbide teeth it’s an excellent nozzle to remove hardest deposits such as concrete and limescale. You can use it with or w/out impact depending on the pipe material. Furthermore you can work in pipes from 100mm – 600mm (4”-24”).
Advantages
• high performance due to high impact
• recycling water | less maintenance
• simple maintenance
• low cost to operate
Technical Data
| Article number |
Connection
|
Pipe Dimension
|
Min. L/min at 100 bar
|
Rear Jets
|
Rotating Jets
|
Length x Diameter
|
Weight
|
Recycling
|
Bursting Pressure
|
|---|---|---|---|---|---|---|---|---|---|
| 2-14100R | 1" | 100 mm (4") | 100 l/min (29 US GPM) | 3 x M10 | 3 x M10 | 350 x 90 mm | 12,3 kg | Yes | 150 bar (2175 PSI) |
| 2-14120R | 1" | 120 mm (4.7") | 120 l/min (32 US GPM) | 3 x M10 | 3 x M10 | 350 x 112 mm | 13,7 kg | Yes | 150 bar (2175 PSI) |
| 2-14150R | 1" | 150 mm (6") | 150 l/min (40 US GPM) | 3 x M10 | 3 x M10 | 350 x 136 mm | 16,3 kg | Yes | 150 bar (2175 PSI) |
| 2-14200R | 1", 1/4" | 200 mm (8") | 200 l/min (53 US GPM) | 3 x M10 | 3 x M10 | 587 x 176 mm | 40 kg | Yes | 150 bar (2175 PSI) |
| 2-14225R | 1", 1/4" | 225 mm (9″) | 220 l/min (58 US GPM) | 3 x M10 | 3 x M10 | 587 x 205 mm | 43,4 kg | Yes | 150 bar (2175 PSI) |
| 2-14250R | 1", 1/4" | 250 mm (10″) | 240 l/min (63 US PGM) | 3 x M10 | 3 x M10 | 587 x 225 mm | 52,5 kg | Yes | 150 bar (2175 PSI) |
| 2-14300R | 1", 1/4" | 300 mm (12″) | 280 l/min (73.9 US GPM) | 3 x M10 | 3 x M10 | 712 x 288 mm | 96 kg | Yes | 150 bar (2175 PSI) |
| 2-14350R | 1", 1/4" | 350 mm (15″) | 280 l/min (73.9 US GPM) | 3 x M10 | 3 x M10 | 712 x 338 mm | 99 kg | Yes | 150 bar (2175 PSI) |