Standard nozzles Hit
Our Standard Nozzles Hit are used to open up clogged pipes, as well as transport lighter material to main line or to removing point. With one front jet and multiple rear thrusting jets, well balanced, allow the nozzle to travel fast up the line. The waterpower from the nozzle is used for working on obstacles in pipe, as well as, increasing transporting power of the water in pipe to remove the material.
The Standard Nozzles Hit are made of quality stainless steel, with a smooth design and smaller diameter than most other nozzles with same thread. The outer diameter of the nozzles is close to the outer diameter of the cleaning hose. The small and smooth design favour nozzle passing through bends or travelling past smaller off-sets or different pipe sizes and minimize the risk of getting stuck. The exception is article no. 2-11020-1615 that has thrusting jets at a lower angle and therefore has a larger outer diameter. With this design comes also more power to move material compared with nozzles having higher jet angles.
The jets are drilled into the nozzle body and jet sizes are adapted to the most common water flows and pressures for each hose size. Some thread sizes come with several flowrate choices. The flowrate stated in the article description is in litre per minute or US Gallons per Minute at 100 Bars (1450 PSI) pressure at nozzle.